• Industrial Wide-Belt Sanders

    3-Head Wide Belt Sander
    Wide-Belt Sander

    Heavy Duty Industrial Wide-Belt Sanders

    Feature Overview: Our wide-belt sanders feature a wide range of , adjustable working thickness, infeed and outfeed, heavy-duty hinged access doors, intuitive/durable , leveling feet, lift points, and are available in different .

    Our high-flow compatibility gives our industrial wide-belt sanders impressive performance for . Safety include heavy duty disc brakes for emergency stop. (see individual product pages for additional specifics)

    Wide-Belt Sanders can improve the efficiency of any finish line, or . With a multi-head wide belt sander, swift, single pass is possible.

    Industrial Belt Sander Requirements: Operating voltage: 460 Volt/60Hz/3 Phase (check with us for other options).
    ** Also available in a Double Head configuration

    Our Wide Belt Sanders

    View Page

  • About Us

    Letter From the Founder

    I wanted to take a moment to say thank you for your interest in our machines. Here are Woodtech , LLC, we take pride in what we do. Our daily goal is to bring quality to the market, and offer them at a fair and . Couple that with attentive , and we feel like we have found a winning combination. 

    Machinery and woodworking has been in our family for years. My father ran a machine shop for over 40 years building machinery for sawmills and woodworking facilities. I personally started and operated a successful wood products company for 14 years. I say that to bring to light the fact that not only are we familiar with machinery, we have also operated these types of machines as a manufacturer over the years. This has significantly informed our process in manufacturing quality machines. These machines are products we would be proud of to have in our own manufacturing business. once said – Well done is better than well said. I can sit here at my desk all day, and this paper I'm writing this on will allow me to write anything that I want, But in the end, I would rather humbly ask that you give us the opportunity to work for you, and show you how we can help you with your machinery needs.

    From our family to yours!
    We wish you many !

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    : 
    : 24”, 42”, 51”: left 
    Enclosed MotorsBrush unit for cleaning panels after

    : 
    WTM-QSG series machine is a precision sander with a for the thickness setting.
    : 3/16” – 4”
    Minimum : 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    : Working : 24”, 42”, 51”
    Service side: left 
    Brush unit for cleaning after

    General technical data: WTM-DSG series is a constant pass-line, bottom sanding machine, it is specially designed for a with a fixed height.Working thickness: 3/16” – 4”
    Minimum : 13”
    : 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:Operating voltage: 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    Features: 
    Working widths: 24”, 42”, 51”
    Service side: left 
    Enclosed Motors
    for cleaning panels after sanding

    General technical data: 
    WTM-FSG machine is a constant pass-line sanding machine, it is specially designed for a sanding line with a fixed height
    Working : 3/16” – 4”
    length: 13”: 0-80 F/min
    Compressed : 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the ; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is . (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    :
    Operating voltage: 460 Volt/60Hz/3
    ** Also available in a Double Head configuration

    View Page