• Double Head Roll Coater

    Double Head Roll Coater Specifications

    Model: WTM-UVRCD series

    : 
    for finish or on wood furniture, , panels etc.

    Specifications: 
    1. in  24”, 36”, 51”
    2. Work piece thickness: 2-80mm
    3. Min working length: 300mm 
    4. Feeding speed: 5-20m/min
    5. Available in double, or triple head configuration
    6. Working height: 800mm

    Features: 
    1. Italian JMC Aluminum alloy reduction gear drive.
    2. Schneider  
    3. High-quality coupling transmission. NSK Japanese bearings.
    4. belt is a 3MM anti-sliding PVC conveyor belt
    5. Precision automatic 0.75kw lifting motor for height adjustment
    6. All adjustments are fitted with individual counters
    7. Rubber or sponge heads available per customers need
    Optional – Double pumps and drains available for individual head use.
    Electrical Requirements: 460 Volt/60Hz/3

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    Features: 
    : 24”, 42”, 51”: left 
    Enclosed MotorsBrush unit for cleaning panels after sanding

    : 
    WTM-QSG series is a precision sander with a movable feed belt for the thickness setting.
    Working thickness: 3/16” – 4”
    Minimum working length: 13”
    : 0-80 F/min
    Compressed : 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating : 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Features: Working widths: 24”, 42”, 51”
    : left Enclosed Motors
    Brush unit for cleaning panels after sanding

    General technical data: WTM-DSG machine is a constant pass-line, bottom , it is specially designed for a with a fixed height.Working : 3/16” – 4”
    Minimum : 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    :: 460 Volt/60Hz/3
    ** Also available in a

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    Features: 
    Working : 24”, 42”, 51”
    Service side: left 
    Enclosed Motors
    Brush unit for cleaning panels after sanding

    : 
    WTM-FSG series machine is a , it is specially designed for a sanding line with a fixed height
    : 3/16” – 4”
    Minimum working length: 13”: 0-80 F/min
    Compressed : 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    :
    : 460 Volt/60Hz/3
    ** Also available in a Double Head configuration

    View Page

  • Moulders

    Heavy Duty 4 sided Moulder

    :
    WTM-330 – 12” wide – available in 4, 5 or 6 .
    WTM-260- 10” wide – available in 4, 5 or 6 head configurations.
    WTM-230 – 9” wide – available in 4, 5 or 6 head configurations.
    WTM-200 – 7” wide – available in 4, 5 or 6 head configurations.

    Requirements: 
    : 460 Volt/60Hz/3

    Available:
    *on WTM-330 , and side pressure
    PLC controlled – LCD readout drive motors
    Belt driven
    Auto Lubrication
    Plus many more…

    View Page