• Grain Filling Machine

    Model: WTM-UVGF Series

    Application: 
    Reverse roll coating for grain fill on , , panels etc.

    Specifications: 
    1. Available in  24”, 36”, 51” Widths
    2. Work piece : 2-80mm
    3. Min working length: 300mm 
    4. : 5-20m/min
    5. Available in single or

    Feature:
    1. Italian JMC alloy reduction gear drive.
    2. Filler scrape wheel equipped with RV reducer to control scraper uniformity.
    3. Schneider  
    4. High-quality coupling transmission. NSK Japanese bearings.
    5. belt is a 2MM anti-sliding PVC conveyor belt
    6. Precision automatic  lifting motor for
    7. All adjustments are fittied with individual counters

    : 
    Operating voltage: 460 Volt/60Hz/3 Phase

    View Page

  • Airjet/IR Tunnel

    Airjet/IR Leveling Tunnel
    Used for drying and leveling of waterbased and reactive finishes

    : WTM-UVIR series

    :
    1. Available in  24”, 36”, 51”
    2. Work piece thickness: 2-80mm
    3. : 5-20m/min
    4. Available in 24', 36' and 48' lengths
    5. : 800mm

    Features:
    1. Conveyor is a
    2. using far-infrared ray IR ceramic 0.3kw lamp tube and 30kw heating box.
    3. Temperature control adopts independent control, accurately control the temperature. The side cover of the oven is easy to be disassembled and installed convenient for maintenance.
    4. Side covers open for convenient lamp disassembly or maintenance. 
    5. 5.5KW high pressure fan, sprayed and dried by 38 jet tip

    Requirements:
    : 460 Volt/60Hz/3

    View Page

  • Stain Brushing Machine

    Model: WTM-UVBR Series

    Name: 
    Machine

    Application: 
    Specially designed for brushing or other on wood furniture, flooring, panels etc. 

    Specifications:
    1. in  24”, 36”, 51” Widths
    2. Work piece thickness: 2-80mm
    3. : 5-20m/min
    4. Available in 2,3 or 4 head configurations
    5. : 800mm

    Feature:
    1. , belt thickness: 2mm thickness
    2. Driving motor 1.5kw Schneider Inverter control
    3. The brush heads slide out for easy cleaning.
    4. Variable speed drives on each brush.

    Electrical Requirements:
    : 460 Volt/60Hz/3

    View Page

  • Transfer Conveyor

    Automatic Transfer Conveyor

    : 
    WTM-UVC

    Specifications: 
    1. in  24”, 36”, 51”
    2. Workpiece : 2-80mm
    3. : 5-20m/min
    4. Available in 6', 8', 10'
    5. : 800mm
    6. Total power: 0.75kw

    Feature:
    1. Flat anti-slip solvent resistance belt, belt thickness: 2mm thickness
    2. Conveyor use 0.75kw Taiwan RV63/30 reduction gears
    3. Schneider controls belt speed

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3

    View Page

  • Double Head Roll Coater

    Double Head Roll Coater Specifications

    : WTM-UVRCD series

    Application: 
    Roll coating for finish or on wood furniture, flooring, panels etc.

    : 
    1. Available in  24”, 36”, 51” Widths
    2. Work piece thickness: 2-80mm
    3. Min : 300mm 
    4. Feeding speed: 5-20m/min
    5. Available in double, or triple head configuration
    6. Working height: 800mm

    Features: 
    1. Italian JMC alloy reduction gear drive.
    2. Schneider electronics 
    3. High-quality coupling transmission. NSK Japanese bearings.
    4. is a 3MM anti-sliding PVC conveyor belt
    5. Precision 0.75kw lifting motor for height adjustment
    6. All adjustments are fitted with individual counters
    7. Rubber or sponge heads available per customers need
    Optional – Double pumps and drains available for individual head use.
    Requirements: 460 Volt/60Hz/3

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    Features: 
    : 24”, 42”, 51”Service side: left 
    Enclosed MotorsBrush unit for cleaning after

    General Technical Data: 
    WTM-QSG series machine is a precision sander with a for the thickness setting.
    Working thickness: 3/16” – 4”
    Minimum : 13”
    Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3
    ** Also available in a

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Features: Working widths: 24”, 42”, 51”
    : left Enclosed Motors
    for cleaning panels after

    General technical data: WTM-DSG series is a constant pass-line, bottom , it is specially designed for a sanding line with a fixed height.: 3/16” – 4”
    Minimum working length: 13”
    Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is . (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:Operating voltage: 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    Features: 
    Working : 24”, 42”, 51”
    side: left 
    Enclosed Motors
    Brush unit for cleaning panels after

    : 
    WTM-FSG series machine is a , it is specially designed for a sanding line with a fixed height
    Working thickness: 3/16” – 4”
    Minimum working length: 13”: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the ; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    : 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page