• Industrial Wide-Belt Sanders

    3-Head Wide Belt Sander
    Wide-Belt Sander

    Heavy Duty Industrial Wide-Belt Sanders

    Feature Overview: Our wide-belt feature a wide range of working widths, adjustable working thickness, and outfeed, heavy-duty , intuitive/durable , leveling feet, , and are available in different head configurations.

    Our high-flow air handling compatibility gives our industrial wide-belt sanders impressive performance for dust collection. Safety features include heavy duty disc brakes for emergency stop. (see individual product pages for additional specifics)

    Wide-Belt Sanders can improve the efficiency of any finish line, or . With a multi-head wide belt sander, swift, single pass sanding is possible.

    Industrial Belt Sander Electrical Requirements: : 460 Volt/60Hz/3 (check with us for other options).
    ** Also available in a Double

    Our Wide Belt Sanders

    View Page

  • Denibbing Machine

    Model: WTM-UVDB Series

    Model Name: 
    Denibbing/sanding machine. This machine is for denibbing/sanding of , flooring, panels etc.

    Specifications:
    1. in  24”, 36”, 51” Widths
    2. : 2-80mm
    3. Feeding speed: 5-20m/min
    4. Available in 2-6 head
    5. : 800mm

    Features:
    1. Feed belt thickness 5mm, high temperature resistance fish bone belt.
    2. Schneider Electronics
    3. control each brushing heads individually
    4. Adjustable height pressure - 2 rolls per head
    5. Height counters with individual height adjustment
    6. Multiple , and brush available
    Optional – Precision automatic lifting motor for height adjustment

    :
    Operating voltage: 460 Volt/60Hz/3 Phase

    View Page

  • In-Line Finish Sander

    Model: WTM-UVS Series

    Name: 

    Application:
    for PU, UV, PE

    Specification:
    1. Available in  24”, 36”, 51” Widths
    2. : 2-80mm
    3. Feeding speed: 5-20m/min
    4. Available in single or double
    5. : 800mm
    7. thickness- 5mm
    8. : 60” Length
    9. Schneider electronics
    10. Variable speed on sanding heads
    11. Cleaning brush on the output side

    Electrical Requirements:
    Operating : 460 Volt/60Hz/3 Phase

    View Page

  • Wire Brushing/Denibbing Machine

    Model: WTM-UVWB Series

    Name: 
    / Denibbing  Machine

    Application:
    Wire , embossment, texturing, of the grain in , flooring, etc.

    :
    1.  Available in  24”, 36”, 51” Widths
    2. Work piece thickness: 2-80mm
    3. Min : 300mm 
    4. Feeding speed: 5-20m/min
    5. Available in 2-6

    Features:
    1. Feed belt thickness 5mm, high temperature resistance fish bone belt.
    2. Schneider Electronics
    3. Delta frequency converter control each brushing heads individually
    4. Adjustable height pressure roller- 2 rolls per head
    5. Height counters with individual height adjustment
    6. Multiple wire diameter and bristle lengths available
    * Optional -Precision automatic for height adjustment

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3 Phase

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    : 
    Working widths: 24”, 42”, 51”Service side: left 
    Enclosed MotorsBrush unit for cleaning panels after sanding

    : 
    WTM-QSG series machine is a with a for the setting.
    Working thickness: 3/16” – 4”
    length: 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    : 460 Volt/60Hz/3
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Features: Working widths: 24”, 42”, 51”
    Service side: left Enclosed Motors
    for cleaning panels after sanding

    : WTM-DSG series machine is a constant pass-line, bottom , it is specially designed for a with a fixed height.Working thickness: 3/16” – 4”
    Minimum working length: 13”
    Feeding speed: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:: 460 Volt/60Hz/3
    ** Also available in a

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    : 
    Working widths: 24”, 42”, 51”
    : left 
    Enclosed Motors
    Brush unit for cleaning panels after

    General technical data: 
    WTM-FSG series machine is a constant pass-line , it is specially designed for a sanding line with a fixed height
    Working : 3/16” – 4”
    Minimum working length: 13”: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:
    Operating : 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

    View Page