• Industrial PUR Glue Line

    Wide-Belt Sander

    Subhead

    Copy: Our industrial PUR Glue Line a wide range of working , adjustable , and , heavy-duty , intuitive/durable control panel, leveling feet, lift points, and are available in double, or triple .

    Safety features include emergency stop. (see individual product pages for additional specifics)

    PUR Glue Line Requirements: Operating : 460 Volt/60Hz/3 (check with us for other options).

    Our PUR Glue Line Equipment

    View Page

    The Woodtech Difference!

    January 22, 2018

    The Woodtech Difference!

    March 26, 2024

  • Industrial Roll Coaters

    Roll Coater

    Heavy Duty Industrial Roll Coaters

    Feature Overview: Our Roll Coaters feature a wide range of , adjustable working thickness, infeed and , heavy-duty , intuitive/durable control panel, feet, , and are available in double, or triple head configurations.

    Our high-flow air handling compatibility gives our industrial wide-belt sanders impressive performance for dust collection. Safety include heavy duty disc brakes for emergency stop. (see individual product pages for additional specifics)

    Multi-head Roll Coaters increase the efficiency of any . Single-pass coating reduces handling, and increases daily output.

    Industrial Belt Sander Electrical Requirements: : 460 Volt/60Hz/3 (check with us for other options).

    Our Roll Coaters

    View Page

  • Industrial Wide-Belt Sanders

    3-Head Wide Belt Sander
    Wide-Belt Sander

    Heavy Duty Industrial Wide-Belt Sanders

    Feature Overview: Our wide-belt sanders feature a wide range of , adjustable working , infeed and outfeed, heavy-duty hinged access doors, intuitive/durable control panel, feet, , and are available in different head configurations.

    Our high-flow air handling compatibility gives our industrial wide-belt sanders impressive performance for dust collection. Safety features include heavy duty disc brakes for emergency stop. (see individual product pages for additional specifics)

    Wide-Belt Sanders can improve the efficiency of any , or wood production. With a multi-head wide belt sander, swift, single pass is possible.

    Industrial Belt Sander Requirements: Operating voltage: 460 Volt/60Hz/3 (check with us for other options).
    ** Also available in a Double

    Our Wide Belt Sanders

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    : 
    Working : 24”, 42”, 51”Service side: left 
    Enclosed MotorsBrush unit for cleaning panels after sanding

    : 
    WTM-QSG machine is a with a movable feed belt for the setting.
    Working thickness: 3/16” – 4”
    : 13”
    : 0-80 F/min
    Compressed : 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Requirements:
    Operating voltage: 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    Features: Working widths: 24”, 42”, 51”
    Service side: left Enclosed Motors
    Brush unit for cleaning panels after sanding

    General technical data: WTM-DSG series is a constant pass-line, bottom sanding machine, it is specially designed for a with a fixed height.: 3/16” – 4”
    length: 13”
    Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:: 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    Features: 
    : 24”, 42”, 51”
    Service side: left 
    Enclosed Motors
    for cleaning panels after sanding

    : 
    WTM-FSG series machine is a , it is specially designed for a sanding line with a fixed height
    Working thickness: 3/16” – 4”
    Minimum : 13”: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the ; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is . (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3 Phase
    ** Also available in a Double

    View Page