• Grain Filling Machine

    Model: WTM-UVGF Series

    : 
    Reverse roll coating for grain fill on wood furniture, , etc.

    Specifications: 
    1. Available in  24”, 36”, 51”
    2. Work piece thickness: 2-80mm
    3. Min : 300mm 
    4. Feeding speed: 5-20m/min
    5. Available in single or double

    Feature:
    1. Italian JMC Aluminum alloy reduction gear drive.
    2. Filler scrape wheel equipped with RV reducer to control scraper uniformity.
    3. Schneider electronics 
    4. High- coupling transmission. NSK Japanese bearings.
    5. Conveyor belt is a 2MM anti-sliding PVC conveyor belt
    6. Precision   lifting motor for
    7. All adjustments are fittied with individual counters

    : 
    Operating voltage: 460 Volt/60Hz/3 Phase

    View Page

  • Airjet/IR Tunnel

    Airjet/IR Leveling Tunnel
    Used for drying and leveling of waterbased and reactive finishes

    : WTM-UVIR series

    :
    1. Available in  24”, 36”, 51” Widths
    2. : 2-80mm
    3. : 5-20m/min
    4. Available in 24', 36' and 48' lengths
    5. : 800mm

    Features:
    1. is a
    2. using far-infrared ray IR ceramic 0.3kw lamp tube and 30kw heating box.
    3. Temperature control adopts independent control, accurately control the temperature. The side cover of the oven is easy to be disassembled and installed convenient for maintenance.
    4. Side covers open for convenient lamp disassembly or maintenance. 
    5. 5.5KW high pressure fan, sprayed and dried by 38 jet tip

    Requirements:
    Operating voltage: 460 Volt/60Hz/3

    View Page

  • Stain Brushing Machine

    Model: WTM-UVBR Series

    Model Name: 
    Stain

    Application: 
    Specially designed for brushing stain or other on wood furniture, flooring, etc. 

    Specifications:
    1. in  24”, 36”, 51”
    2. Work piece thickness: 2-80mm
    3. Feeding speed: 5-20m/min
    4. Available in 2,3 or 4 head
    5. Working height: 800mm

    Feature:
    1. Flat anti-slip solvent resistance belt, belt thickness: 2mm thickness
    2. Driving motor 1.5kw Schneider Inverter control
    3. The brush heads slide out for easy cleaning.
    4. Variable speed drives on each brush.

    Requirements:
    : 460 Volt/60Hz/3

    View Page

  • Transfer Conveyor

    Automatic Transfer Conveyor

    Model: 
    WTM-UVC Series

    Specifications: 
    1. in  24”, 36”, 51”
    2. : 2-80mm
    3. Feeding speed: 5-20m/min
    4. Available in 6', 8', 10' lengths
    5. Working height: 800mm
    6. : 0.75kw

    :
    1. Flat anti-slip solvent resistance belt, belt : 2mm thickness
    2. use 0.75kw Taiwan RV63/30 reduction gears
    3. converter controls belt speed

    :
    Operating voltage: 460 Volt/60Hz/3

    View Page

  • Double Head Roll Coater

    Double Head Roll Coater Specifications

    : WTM-UVRCD series

    Application: 
    Roll coating for finish or stain on wood furniture, flooring, etc.

    Specifications: 
    1. Available in  24”, 36”, 51”
    2. Work piece thickness: 2-80mm
    3. Min : 300mm 
    4. : 5-20m/min
    5. Available in double, or triple head configuration
    6. Working height: 800mm

    Features: 
    1. JMC Aluminum alloy reduction gear drive.
    2. Schneider  
    3. High-quality coupling transmission. NSK Japanese bearings.
    4. is a 3MM anti-sliding PVC conveyor belt
    5. Precision 0.75kw lifting motor for height adjustment
    6. All adjustments are fitted with individual counters
    7. Rubber or sponge heads available per customers need
    Optional – Double pumps and drains available for individual head use.
    RequirementsOperating voltage: 460 Volt/60Hz/3 Phase

    View Page

  • Wide Belt Sanders

    WTM-QSG Series Top Surface Sander Triple – Belt Sander Roller + Combination

    Features: 
    Working widths: 24”, 42”, 51”: left 
    Enclosed MotorsBrush unit for cleaning panels after sanding

    : 
    WTM-QSG series is a with a movable feed belt for the thickness setting.
    Working thickness: 3/16” – 4”
    Minimum : 13”
    Feeding speed: 0-80 F/min
    Compressed : 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control. Press rollers assure the flatness of the boards for an even sanding is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is . (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    Operating voltage: 460 Volt/60Hz/3 Phase
    ** Also available in a

    View Page

  • Wide Belt Sanders

    Heavy Duty 4 sided Moulder
    WTM-DSG Series Bottom Surface Sander
    Triple-belt sander roller + combination

    : Working widths: 24”, 42”, 51”
    Service side: left Enclosed Motors
    Brush unit for cleaning after sanding

    General technical data: WTM-DSG machine is a constant pass-line, bottom sanding machine, it is specially designed for a with a fixed height.: 3/16” – 4”
    Minimum working length: 13”
    : 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    : 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: Pressure units to hold the work pieces on the ; are positioned in front and rear of each sanding head: independent variable pressure control.
    Press rollers assure the flatness of the boards for an even sanding Is suitable for short piecesSteel press shoes are optional.
    1st head is steel with helical grooves for cooling.
    -Hard Rubber roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.
    -Steel roller is available. (optional)
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.
    -Pad can be adjusted up and down.
    -Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    :Operating voltage: 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

    View Page

  • Wide Belt Sander

    WTM-FSG Series Constant Pass-Line, Top Surface Sander
    Triple-belt sander roller + combination

    Features: 
    Working : 24”, 42”, 51”
    Service side: left 
    Enclosed Motors
    Brush unit for cleaning after sanding

    : 
    WTM-FSG is a constant pass-line , it is specially designed for a with a fixed height
    Working thickness: 3/16” – 4”
    length: 13”: 0-80 F/min
    Compressed air consumption: 1.5 CBM/min
    Overall dimension: 94”x82x80”
    Drives from main motors to sanding heads are run with V-belts and pulleys, Heavy Duty disk brakes for emergency stop.

    Pressure Units: 
    Pressure units to hold the work pieces on the feed belt; are positioned in front and rear of each sanding head: independent variable pressure control.Press rollers assure the flatness of the boards for an even sandingIs suitable for short piecesSteel press shoes are optional.
    1st head roller is steel with helical grooves for cooling.-Hard Rubber roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    2nd head roller is Rubber with helical grooves for cooling.-Steel roller is available. (optional)-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.
    The 3rd sanding head is a combination of roller and pad.-Pad can be adjusted up and down.-Oscillating air jet blowers for sanding belt cleaning, complete with dust hood.

    Electrical Requirements:
    : 460 Volt/60Hz/3 Phase
    ** Also available in a Double Head configuration

    View Page